Tabla de contenido
Idiomas disponibles
Idiomas disponibles
The PTP 670 Connectorized ODU is intended to work with separately mounted external antennas. External
antennas generally have higher gains than the integrated antennas, allowing the PTP 670 to cope with more
difficult radio conditions.
Mounting bracket options
The PTP 670 series supports three mounting bracket options. Select the optimum mounting bracket
arrangement based on the pole diameter and the ODU variant:
Bracket
Tilt Bracket Assembly
Tilt Bracket Assembly
with compression straps
Mounting Bracket
(Integrated)
Note The Tilt Bracket Assembly is included as part of the PTP 670 Integrated and
Connectorized Kits. If required, order the Mounting Bracket (Integrated) separately.
Note The Tilt Bracket Assembly allows for elevation angle adjustment for the Integrated ODU
between –17° and +26°. The Mounting Bracket (Integrated) allows for elevation angle
adjustment between –26° and +41°.
Pole diameter
40 mm to 77 mm (1.6
inches to 3.0 inches)
90 mm to 230 mm (3.6
inches to 9.0 inches)
40 mm to 82 mm (1.6
inches to 3.2 inches)
PAGE 16
ODU variants
PTP 670 Integrated PTP
670 Connectorized
PTP 670 Integrated PTP
670 Connectorized
PTP 670 Integrated
PTP 670 QUICK START GUIDE
Bracket part number
N000045L002A
N000045L002A + third-
party band clamps
N000065L031A
Tabla de contenido
