Kohler 3200 Serie Guia De Instalacion página 6

5. Adjust the Wall Jambs
Adjust the wall jambs by inserting a Phillips screwdriver through the adjustment holes.
NOTE: Adjust the wall jambs evenly to maintain the proportions of the door.
Turn the plastic adjustment screw until the wall jambs contact the wall. Maximum adjustment is
3/4" (2 cm) on each side.
Secure the door with three #8-18 x 3" screws on each side.
6. Adjust the Rollers
NOTE: Perform this step from inside the shower.
If necessary, from inside the shower, loosen the top and bottom roller screws.
Lift the handle side of the door until the top frames are parallel with the top track.
Tighten the roller screws.
Loosen the bottom rollers and adjust them as far upward as possible.
Retighten them.
Test and Final Adjustments
Open and close the door.
If necessary, remove the center wall jamb mounting screw on the handle side of the door.
Adjust the door by turning the center plastic adjustment screw in or out as needed.
1034027-2-B 6 Sterling