Electromagnetic Fields (Emf); Before First Use; Using The Appliance; Toasting Bread - Philips Comfort HD4845 Manual Del Usuario

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled
properly and according to the instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.

Before first use

1 Remove any stickers and wipe the body of the toaster with a damp cloth.
2 Let the appliance complete a few toasting cycles without slices of bread on the highest
browning setting in a properly ventilated room. This burns off any dust that may have
accumulated on the heating elements and prevents unpleasant smells during toasting.

Using the appliance

Never let the toaster operate unattended.
The metal parts of the toaster become hot during toasting. Do not touch them.
1 Put the appliance on a stable and flat surface, away from curtains and other combustible
materials.
2 Put the plug in an earthed wall socket.

Toasting bread

1 Put the bread in the toaster.
- HD4818/HD4816/HD4815: The toaster is suitable for one or two slices of bread (Fig. 1).
- HD4845: The toaster is suitable for one to four slices of bread (Fig. 2).
Tip: For the best toasting results, always put the slices in the centre of the slots.
2 Set the desired browning setting. (Fig. 3)
Select a low setting (1-2) for lightly toasted bread and a high setting (5-7) for darkly toasted or
frozen bread.
3 Push down the toasting lever to switch on the appliance. (Fig. 4)
Note: The toasting lever only stays down if the appliance is connected to the mains.
Note: To adjust the browning setting during toasting, turn the browning control to the desired setting.
Note: You can stop the toasting process and pop up the bread at any time by moving up the toasting
lever manually (Fig. 5).
4 When the toast is ready, it pops up and the toaster switches off (Fig. 6).
- If bread gets stuck inside the toaster, remove the plug from the wall socket, let the appliance
cool down completely and carefully remove the bread from the toaster.
Do not use a knife or another sharp metal tool to remove bread from the toaster and do not
touch the metal internal parts of the toaster.
Warming up rolls or croissants (HD4818 only)
1 Place the warming rack on top of the toaster (Fig. 7).
Note: To prevent overheating, do not put more than two items on the rack at the same time.
2 Place the rolls or croissants in the centre of the rack (Fig. 8).
3 Set the browning control to the rolls setting. (Fig. 9)
Note: Do not set the browning control to a setting higher than 3.

EnglisH

7