CAMPAGNOLO C10 HD-L Manual De Instrucciones página 12

• Unscrew tool UT-CN200, then fit the link to be
closed in the relative seats (Fig. 10).
• Clamp the link with the special clamping
device (A) (Fig. 11).
• Make sure that the tapered tip of the pusher
(F) (Fig. 11) is in alignment with the center of
the small pin (E) (Fig. 12).
11
F
A
20
10
UT-CN200
12
External side
of the chain.
E
F
ENGLISH
• Apply uniform force to tighten the tool (Fig.
13) until the small pin (E) completely enters
the hole in the link.
Note
To avoid irreparable damage to the chain,
NEVER TIGHTEN the tool beyond the locator
stop. Allow the small pin (E) to protrude 0.1 mm
from the internal side of the chain (Fig. 14).
• Remove the clamping device and remove the
chain from the tool.
• Slide the small guide pin (D) out of the link
(Fig. 15).
14
Internal side
of the chain.
E
0,1 mm
ENGLISH
13
E
15
D
External side
of the chain.
21