sanindusa PLAN Instrucciones De Montage Y Manutencion página 65

INDICATOR
The red LED indicator in the sensor blinks when the user steps within the sensor's range.
CAUSE
Debris or dirt in the solenoid valve clog up the bleeding hole
SOLUTION
Replace or clean the solenoid valve.
Unscrew the solenoid, pull out the plunger and the spring from the solenoid and clean them.
When placing the plunger and spring back, please make sure the spring is in vertical position.
INDICATOR
The red LED indicator in the sensor blinks when the user steps within the sensor's range.
CAUSE
The water supply pressure is higher than 8 bars or pressure peaks over 8 bars in the water supply causes
pressure to be trapped in the flush valve.
SOLUTION
Reduce the water supply
//TROUBLE – SHOOTING