3M Filtrete Standard Guía De Uso Y Cuidado página 6

ATTACH THE FILTER:
You will need: filter (A)
1. Insert the filter (A) into the filter head
assembly (B).
2. Push filter up, then turn one quarter of
a turn to the right until it stops. The filter
will rotate very easily during the first
portion of the rotation. Continue rotating
until the filter stops and can be rotated
no further. (Fig. 13)
3. When properly attached, there will
be NO gap between the filter head
assembly (B) and the filter (A).
ATTACH THE FILTER HOLDER:
You will need: filter holder (J)
1. Insert the filter into filter holder.
2. Determine desired filter holder placement.
3. Remove the red liner from the Command
Mounting Strip and press firmly against the bottom
of cup holder. The Strip should be adhered in the
middle of the cup holder with the tab towards you.
4. Next peel back the wall side black liner and adhere
to a flat bottom under sink cabinet area.
™
6
(Fig. 13)