Maintenance; Maintenance Procedure - FAR LEO CI Manual Del Usuario

ENGLISH
Image 12

MAINTENANCE

MAINTENANCE PROCEDURE

1. The filter must be cleaned twice a year and
when it is visibly dirty.
2. Always reinstall the filter correctly before
using the vacuum cleaner.
3. The filter must not be cleaned in a washing
machine or dried with a hair dryer.
4. Using a damp filter will reduce the suction
power and will damage the motor.
5. Maintenance procedure:
1) Press on the air output grille lock and
remove it (Image 14).
2) Remove the air output filter (Image 15).
3) Twist the HEPA filter cup to remove it
from the collector lid (Image 16).
GB-10
Image 13
4) Separate the HEPA filter from its cup
(Image 17).
5) Remove any matted hair/fur/fluff (Image
18).
6) Remove the HEPA filter and wash it
(Image 19).
7) Wash the HEPA filter cup, the HEPA filter,
the air output filter and the dust collector in soap-free water, then leave them to dry
before reuse.
8) Attach the HEPA filtration unit to the
lid of the collector, ensuring that the three
protruding cubes are inserted into the slots
of the collector.
9) Twist the HEPA filtration unit in the
direction indicated on the lid of the
collector.
10) Attach the collector lid to the collector,
following the exterior marker.
11) Attach the dust collector to the appliance.
Position the collector correctly, then press
on the handle until you hear a click, which
indicates that it is correctly slotted in.
ENGLISH
GB-11