Assembly Instructions - Insignia NS-HWD1761 Guia Del Usuario

ASSEMBLY INSTRUCTIONS

Step 1: Preparing the top and bottom
Caution: Assemble your stand on a carpeted floor or on the empty box to avoid scratching your stand.
1 Place the top (1) and bottom (4) flat on the floor.
2 Insert wooden dowels (C) into the eight inside holes in the ends of the top and bottom.
3 Screw four cam screws (B) into the outside holes in the top (as shown).
Note: Only screw the cam screws in to the depth of the thread.
You'll need:
6
B (4)
www.insigniaproducts.com
C (8)
Phillips screwdriver
NS-HWD1761