Insignia NS-HWD1761 Guia Del Usuario página 20

Step 15 Adding the drawer bottoms and backs
:
1 Slide the drawer bottom (14), finished side up, into the slots in the drawer sides (11 and 12) until it goes into the
slots in the drawer fronts (15).
2 Align the drawer back (13) with the drawer sides (11 and 12) (as shown), making sure that the bottom fits into
the slot in the front of the drawer back.
3 Use a Phillips screwdriver, secure the drawer back to the drawer sides with four 1-1/2-in. Phillips head screws
through the pre-drilled holes in the drawer sides.
4 Repeat for the second drawer.
You'll need:
20
D (8)
www.insigniaproducts.com
Phillips screwdriver
NS-HWD1761