Insignia NS-HWD1761 Guia Del Usuario página 19

Espresso Wood Finish TV Stand for TVs up to 65"
Step 14 Adding the drawer sides
:
1 Align a left and right drawer side (11 and 12) with the drawer front (15) (as shown), then push the drawer sides
together with the drawer front.
2 Push hidden cams (E) into the two large holes on the outsides of the drawer sides (11 and 12), engaging the
cam screws (F) in the drawer fronts with the hidden cams (E) that you just installed in the drawer sides. Make
sure that the arrows on the hidden cams point to the holes on the outside edges of the drawer sides.
NOTE: Make sure to use hidden cams (E) rather than hidden cams (A).
3 Use a Phillips screwdriver to tighten the four hidden cams in the drawer sides, then cover the hidden cams with
the cam covers (K).
4 Repeat for the second drawer.
You'll need:
K (8)
E (8)
www.insigniaproducts.com
Phillips screwdriver
19