How To Start - Craftsman 919.167321 Instrucciones De Seguridad E Instalación

grasp air hose in hand when
installing or disconnecting to
prevent hose whip.
use damaged or worn accessories.
NOTE: The hose or accessory will
require a quick connect plug if the air
outlet is equipped with a quick con-
nect socket.
pressure causes a hazardous risk of
bursting. Check the manufacturer's
maximum pressure rating for air
tools and accessories. The regulator
outlet pressure must never exceed
the maximum pressure rating.
Compressed air from the unit may
contain wa ter condensation and
oil mist. Do not spray un fil tered air
at an item that could be damaged
by moisture. Some air tools and
accessories may require filtered
air. Read the in struc tions for the air
tools and accessories.
A17883
Risk of unsafe
operation. Firmly
Risk of unsafe
operation. Do not
Risk of Bursting.
Too much air
Risk of unsafe
operation.

How to Start:

1. Set the On/Auto/Off lever to "On/
Auto" and allow tank pressure to
build. Motor will stop when tank
pressure reaches "cut-out" pres-
sure.
2. Pull the regulator knob out and
turn clockwise to increase pres-
sure. When the desired pressure
is reached push knob in to lock in
place.
is noticed, stop the compressor
immediately and have it checked by
a trained service technician.
The compressor is ready for use.
14 - ENG
If any unusual
noise or vibration