Setting Up The Security Function - Panasonic PT-LC76U Instrucciones De Funcionamiento

This can help to extend the lamp's
operating life. If using the projector in
small rooms where high luminance is
not required, it is recommended that
you set the LAMP POWER to "LOW".
LAMP RUNTIME
This setting displays the usage time
for the lamp unit which is currently
being used.
NOTE:
B The lamp's operating life varies
depending on the usage
conditions (such as the LAMP
POWER setting and the number
of times the power is turned on
and off).
FUNC 1
F U N C 1 I N D E X
[
K E Y S T O N E
This assigns a function to the F1
button of the ET-RM200 wireless
remote control unit (sold
separately).
INDEX
Functions in the same way as the
INDEX WINDOW button on the
accessory card remote control unit.
(page 29)
KEYSTONE
Functions in the same way as when
"KEYSTONE" is selected from the
MAIN MENU screen. (page 34)
44-E
NGLISH
CONTROL KEY
C O N T R O L K E Y O N
[
O F F
To disable the buttons on the
projector, set CONTROL KEY to
"OFF". A confirmation screen will
then be displayed. Select "OK" by
using I and H buttons. To use the
buttons on the projector, set to "ON"
by using the remote control unit.
(page 14)
AUTO POW.OFF
If any signal is not input into the
projector during the time that you set
up, the projector will return to standby
mode. The auto power off time can
be set to, from 15 minutes to 60
minutes, by 5 minutes. If you don't
use this feature, set it to "DISABLE".
This feature will not function when
using the freeze function.

Setting up the SECURITY function

This projector is equipped with a security function. A password input screen
can be displayed, or a company URL can be set up and displayed at the
bottom of the projected image.
Use the F and G buttons on the
projector or remote control unit to
select SECURITY, then press the
ENTER button.
M E N U
K E Y S T O N E
P I C T U R E
P O S I T I O N
I N D E X W I N D O W
S H U T T E R
V O L U M E
L A N G U A G E
O P T I O N 1
O P T I O N 2
S E C U R I T Y
S E L E C T E N T E R E X I T
P A S S W O R D
O K R E T U R N
(When you use the SECURITY
function for the first time)
Press the F, H, G, I, F, H, G
and I buttons in order, then press
the ENTER button.
(When a password change has
been made before)
Type in the changed password, then
press the ENTER button.
S E C U R I T Y
I N P U T P A S S W D O F F
A M E N D P A S S W D
T E X T D I S P L A Y O N
T E X T C H A N G E
S E L E C T A D J R E T R N
INPUT PASSWD
The password input screen can be
displayed when the power is turned
on. All of the controls other than the
POWER button are disabled unless
the password is entered correctly.
ON
INPUT PASSWD is enabled.
OFF
INPUT PASSWD is disabled. The
password input screen will not be
displayed when the power is turned
on.
AMEND PASSWD
Passwords can be changed.Press
the ENTER button to display the
AMEND PASSWD screen.
A M E N D P A S S W D
N E W
C O N F I R M
O K R E T U R N
# Set a password by pressing the
F,G,I, and H buttons on the
remote control unit. (A maximum
of 8 buttons can be set.)
$ Press the ENTER button.
% Enter the password again for
confirmation.
& Press the ENTER button.
(Password change will be
completed.)
E -45
NGLISH