How To Clean - Hoover Cyclonic Upright El Manual Del Propietario

3-3
C
Holding dirt cup over trash recepta-
cle, press dirt cup door release but-
ton (C) to open dirt cup door (D).
Close door and press dirt cup door
release button to latch dirt cup door
closed.
Cleaning filters
Cyclonic filter assembly

How to clean

Disconnect cleaner from electrical out-
let. Do not use cleaner without dirt cup
or filters in place.
3-6
A
Remove dirt cup as described in Fig. 3-2.
Twist filter assembly (A) counterclock-
wise. Remove assembly from dirt cup.
Secondary filter
How to clean
Disconnect cleaner from electrical
outlet. Do not operate cleaner
without dirt cup or filters in place.
3-8
A
B
Remove dirt cup as described in
Fig. 3-2.
3-4
D
Place bottom of dirt cup into cleaner
body first. Pivot cup into cleaner
body.
3-7
Dirt and debris can be cleaned from
the filter assembly by brushing with
the cleaner's combination tool.
Place the filter assembly on the dirt
cup, aligning (3) tabs (A) on filter
with (3) slots on dirt cup (B) and
twist it clockwise to secure into
position. Press dirt cup door release
button (C) to latch dirt cup door
closed.
Replace dirt cup as described in
Figs. 3-4 & 3-5.
With thumb, slide latch (A) located
at the top of the housing to the right
and pull down to remove filter frame.
Remove black foam filter from frame.
Rinse filter frame and foam filter
under cold water.
Allow both filter frame and filter to air
dry for 24 hours before replacing fil-
ter into filter frame. Reposition filter
frame by inserting tabs (B) into slots
B
on back of housing. Rotate filter
frame up toward top of housing and
snap closed.
What to buy
When purchasing a new secondary
filter assembly, ask for HOOVER
part No. 40110-012.
3-5
Press on dirt cup release button
while firmly pressing on dirt cup.
Release button in order for it to
return to proper position and lock
the dirt cup into place.
A
B
C
Continued
9