Instructions For Use - Veridian Healthcare TENS Manual De Instrucciones

insTRUcTiOns FOR UsE

Read all warnings and cautions completely before use.
Treatment time is 20-minutes. Discontinue use immedi-
ately if treatment is uncomfortable or painful.
1. Treatment area should be clean and dry before applying the
control unit. Note that excessive skin lotion or soap residue may
affect the adhesiveness of the pad. Only use on HEALTHY skin
areas with no cuts, sores or wounds.
2. Apply the control unit and pad to the desired treatment area.
3. Ensure the electrode pads are smoothly applied and the gel
adhesive is holding the pad firmly in place on the skin.
Press and release the POWER symbol button. A GREEN led light
4.
will flash briefly and the device will
beep to indicate the power is on.
5. The TENS unit will begin to operate
at the lowest level setting. The
default lowest level mode is a
rotation of 4 pulse types at level
1 — scraping, massage, tapping,
acupuncture.
6. Press and release the '+' button to
18 • English
+ Increase
Intensity
Level
POWER
On/Off
– Decrease
Intensity Level