Preparing Your Device - Veridian Healthcare TENS Manual De Instrucciones

PREPARing yOUR DEvicE

It is necessary to prepare and assemble your device prior to treatment.
NOTE: Save the large plastic film for storage after treat-
ment to protect the gel pads from dirt and debris.
1. Peel off the one side of the blue plastic from the gel pads.
2. The gel pads are applied to the back of
the TENS Control Unit along the curved
electrode ridges.
3. While the device is OFF (the GREEN LED
light is NOT illuminated), carefully align
the gel pads on the back side as shown
and press firmly to ensure the pads are
completely adhered to the electrode
ridges.
4. Carefully remove the plastic film from the
electrode pads.
5. You are ready to apply the pad to the
affected treatment area.
Do not turn the power ON until the
device is in place on the user's skin as
indicated in the 'Instructions for Use'
section of this manual.
English • 15