Floor Stand Assembly Instructions - Veridian Healthcare Sterling Serie Manual De Instrucciones

FLOOR STAND ASSEMBLY INSTRUCTIONS

ASSEMbLy Of ThE STANd/bASE REqUIRES A phILLIpS-hEAd SCREwdRIvER ANd
SOCkET wRENCh wITh 9/16" OR 14MM ATTAChMENT.
1. Insert the 5 caster wheels into the black plastic base. The
casters will 'click' into place, Fig 1. Gently pull on each
one to ensure they are completely attached. Turn the
base over onto the wheels.
2. Insert the black pole into the base; smaller end down,
open end up, Fig 2.
3. Turn the pole and base over to attach the weight to the
center of the underside of the base. Thread the two
washers onto the bolt, and insert the bolt through the
weight and into the stand base, securing with the socket
wrench, Fig 3.
4. Turn the stand over so that the xture is resting upright
on the caster wheels. Insert the spring into the black
bottom tube, Fig 4.
5. Insert the silver top portion of the pole into the black
bottom portion, Fig 5.
6. Attach the height adjustment knob to stand, turning
clockwise to tighten, counterclockwise to loosen, Fig 6.
Fig. 2
6 6 • • E E N N G G L L I I S S H H
Fig. 3 Fig. 4
Fig. 6
Fig. 5
Fig. 1