agreto B400 Manual Del Usuario página 7

English
Press the [OK] key twice.

Now load the scale with a weight known to you or place a known quantity of material into the attachment

unit. The weight should be as large as possible. The device should ideally be completely full.
So that occurring tensions in the attachment unit and in the scale do not affect the calibration, move a

little to the front and back again.
Change the displayed number to the actual put in weight by entering the weight on the number pad.

After pressing the [OK] button, the display will show S.inP; the calibration will now be performed. Wait

until "Done" appears on the bottom display.
Press the [Ok] button, and SPAN will appear on the display.

Press the [ZERO] button repeatedly until END appears on the display.

Press [TARE], and the settings will be saved; the display will restart.

13 Switching off
Press and hold the leftmost key until the weighing indicator goes off.
© AGRETO electronics GmbH 7