Rola TOP RAIL KIT Manual Del Usuario página 3

Please read all instructions carefully before assembly, installation and/or use of this product.
1
• IMPORTANT NOTE! Use anti-seize thread lubricant on all stainless steel hardware. DO NOT use air tools to install hardware.
• Assemble the two side rails starting at the rear and working toward the front.
• Connect (2) straight rails to right hand end assembly using (4) 10-24 x 1-1/2" screws and (4) 10-24 lock nuts.
• Attach a connecting plate to the free end of the rails using (4) 10-24 x 1-1/2" screws and (4) 10-24 lock nuts.
• Attach (2) straight rails using (4) 10-24 x 1-1/2" screws and (4) 10-24 lock nuts.
• Attach a connecting plate to the free end of the rails using (4) 10-24 x 1-1/2" screws and (4) 10-24 lock nuts.
• Add the straight front bottom rail and angled upper rail using (4) 10-24 x 1-1/2" screws and (4) 10-24 lock nuts.
• Press end cap into the end of angled rail and front rail, joining them together. (Use rubber mallet if necessary).
• Firmly tighten all 10-24 screws.
• Repeat steps above for Left Hand Assembly.
RIGHT END ASSEMBLY
Cequent Performance Products, Inc.
Plymouth, MI 48170
Technical Service: (888) 521-0510
Left Hand Side Rail Assembly
REAR STRAIGHT RAIL
(2) PLACES
Product Name:
Right Hand Side Rail Assembly
CONNECTOR PLATE
(2) PLACES
CENTER STRAIGHT RAIL
(2) PLACES
Page 3 of 6
TOP RAIL KIT
59798
Product Code:
ANGLED RAIL
FRONT BOTTOM RAIL
59798N Rev D 5-26-15
Printed in China
END CAP