Philips Jamie Oliver HomeCooker HR1040 Manual De Usario página 15

Melting, keep warm, simmering, boiling, and frying with stirrer
1 Place the stirrer on the cone in the pot.
Note: For easy assembly, always put the stirrer in the pot before you add the
ingredients.
2 Put the ingredients you want to prepare in the pot. If necessary, add
water (e.g. to cook potatoes).
Caution: Make sure the ingredients in the pot do not exceed the MAX
indication.
Note: Certain ingredients may cause discolouration. If you spill ingredients on
the outside of the appliance, wipe away the spills immediately.
Tip: For cooking times and temperatures, see the recipe book.
3 If desired, put the lid on the pot.
4 Follow the instructions in section 'Using the control panel'.
5 When the set time has elapsed, remove the ingredients from the pot
with a spatula or a scoop. Press any button to stop the beeping.
Note: You can blend the ingredients in the pot with a hand blender, but only if
you remove the stirrer from the pot first.
Note: If you want to remove the stirrer, never touch the hot ingredients and
only touch the top of the stirrer.
6 Switch off and unplug the appliance.
Caution: When you switch off and/or unplug the appliance, the red
'heating plate hot' indication light goes out. However, the heating plate
may still be hot. Always let the heating plate cool down completely
before you handle or clean the base.
Steaming and boiling without stirrer
1 Remove the stirrer from the cone in the pot.
EnglisH
15