Using The Appliance; Using The Control Panel - Philips Jamie Oliver HomeCooker HR1040 Manual De Usario

EnglisH
12

Using the appliance

For cooking and steaming tips and recipes, see the recipe book and visit
our website www.philips.com/homecooker.

Using the control panel

1 Press the on/off button.
, The temperature shown on the display is '- -' and the time shown is
00:00.
Note: If you do not use the appliance for 10 minutes, it goes into standby
mode to save energy. In this mode, the start/pause button flashes every 10
seconds. If you want to switch the appliance back on, press the start/pause
button.
Note: If the appliance is still hot but is cooling down, it goes into standby mode
to save energy. The 'heating plate hot' light lights up as long as the plate is hot.
If you want to switch the appliance back on, press the start/pause button.
Note: If you switch off the appliance or if you unplug the appliance, the
'heating plate hot' light goes out. However, the heating plate may still be hot.
2 Press the temperature increase or decrease button one or more
times to set the required temperature.
, The set temperature is shown on the display. The temperature flashes
to indicate that the appliance is changing the temperature.