Keep Away Tag Instructions - Garmin Keep Away Tag Manual De Instrucciones

Keep Away Tag Instructions

See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Installing the Battery
1
Locate the circular battery cover
Away Tag sensor.
2
Twist the cover counter-clockwise until it is loose enough to
remove.
3
Remove the cover.
4
Place the battery into the cover with the positive side facing
the inside of the cover.
NOTE: Do not damage or lose the O-ring gasket.
5
Replace the cover by aligning the dots
clockwise.
When paired with a compatible dog collar device, the Garmin
Canine Connect app indicates when less than 1 wk. battery life
™
remains for the sensor.
TIP: To replace the battery, you can use a piece of tape
magnet to remove the battery from the cover.
Garmin Canine Connect
The free Garmin Canine Connect app allows you to review your
dog's daily activity and get insights into your dog's behavior.
When you pair a compatible dog collar device, you can train
your dog remotely using tones, vibrations, and stimulations, and
download software updates for your dog device. You can pair
Keep Away Tag sensors to keep your dog out of undesired
areas.
Pairing the Sensor with Your Device
Pairing is the process of connecting an ANT+
like the Keep Away Tag sensor, with a compatible dog collar
device. You can use the Garmin Canine Connect app on your
compatible smartphone to pair the sensor with your device.
1
Install the battery in the sensor.
The sensor turns on.
2
Go to www.garmin.com/apps, and download the Garmin
Canine Connect app to your smartphone.
3
Open the Garmin Canine Connect app on your smartphone.
4
Follow the on-screen instructions to pair the sensor with your
device.
5
Bring your smartphone within 3 m (10 ft.) of the sensor and
the device.
NOTE: Stay 10 m (33 ft.) away from other sensors while
pairing.
6
Hold the sensor and dog collar device together.
When the sensor and device are paired, a message appears.
2
WARNING
on the back of the Keep
and rotating
wireless sensor,
®
7
Follow the on-screen instructions to set the range.
8
Follow the on-screen instructions to select corrective actions.
Tips for Setting the Range
You can use the Garmin Canine Connect app to set and test the
effective range of the sensor (up to 3 ft.).
• After the sensor is installed, approach the sensor from
multiple directions with the dog collar device to test the
range.
• Adjust the effective range.
• For best results, select the smallest range necessary to keep
your dog out of undesired areas.
Installing the Sensor
You can use the included adhesive mount to install the sensor in
the location your dog should avoid. For example, a trash can.
You can install multiple sensors. Go to buy.garmin.com, or
contact your Garmin
accessories.
1 Attach one side of the adhesive mount to the center of the
battery door.
2 Attach the other side of the adhesive mount to the location.
Tips for Installing the Sensor
• For maximum transmission range, place the sensor in a
location with an unobstructed view in all directions.
• For best results, do not place the sensor on or inside metal
objects.
For example, to avoid a metal trash can, you can install the
sensor on the wall near the trash can.
or a
• Do not put the sensor in water.
• Do not bury the sensor.
Keep Away Tag Specifications
Battery type
Battery life
Operating temperature
range
Radio frequency/protocol
Water rating
*The device withstands incidental exposure to water of up to 1 m
for up to 30 min. For more information, go to
/waterrating.
Limited Warranty
The Garmin standard limited warranty applies to this accessory.
For more information, go to
.html.
® dealer for information about optional
User-replaceable CR2032, 3 V
Up to 3 mo.
From -20° to 60°C (from -4° to 140°F)
2.4 GHz wireless communications protocol
IEC 60529 IPX7*
www.garmin.com
www.garmin.com/support/warranty
Installation Instructions