Berker 7531 40 07 Instrucciones De Uso página 15

GB GB
Connection Connection
8-channel C-load switching actuator (fig. E).
E
Bus connection is by means of the bus connector .
In the 8-channel actuator, the switching statuses of the relays are
indicated by the switch position indicators . These are used at the
same time for manual operation of the relays independent of the EIB
Important: Observe that the switching status indicators in the C-
load actuator are inverted for constructional reasons.
The actuators are connected as shown in the schematic.
The actuator outputs can be connected to different phase conductors.