Berker 7531 40 07 Instrucciones De Uso página 14

GB GB
Connection Connection
6-channel actuator (fig. C), 8-channel actuator (fig. D).
Bus connection is by means of the bus connector .
In the 8-channel actuator, the switching statuses of the relays of
outputs A1 - A4 are indicated by the switch position indicators . They
are used at the same time for manual operation of the relay outputs
A1 – A4 of the 8-channel actuator independent of the EIB.
C D
The actuators are connected as shown in the schematic.
The actuator outputs can be connected to different phase conductors.