Tabla de contenido
Idiomas disponibles
Idiomas disponibles
plications which generate dust.
9) Always check walls and ceiling to avoid hidden power cables and pipes.
10) Use clamps or a vise to hold work-piece whenever possible.
11) Save these instructions. Refer to them frequently and use them to instruct others who may
use this tool. If someone borrows this tool, make sure they have these instructions.
WARNING! Some dust created by power sanding, sawing, grinding, drilling and
other construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemical are:
• Lead from lead-based paint
• Crystalline silica from bricks and cement and other masonry products
• Arsenic and chromium from chemically-treated lumber
Your risk to these exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemicals:
• Work in a well ventilated area
• Work with approved safety equipment, such as those dust masks that are specifically designed
to filter out microscopic particles.
BATTERY / CHARGER
1.
Do not dispose of batteries in fire, or with household waste. Return exhausted batter-
ies to your local collection or recycling point.
2.
Before using battery charger, read all instructions and cautionary markings on (1)
battery charger, (2) battery pack, and (3) product using battery.
3.
CAUTION: To reduce the risk of injury, a WORX charger should only be used to
charge a WORX battery pack. Other types of batteries may burst causing personal injury
and damage. Do not charge a WORX battery pack with any other charger.
04
4.
Do not store the battery pack in temperatures over +102ºF (39ºC).
5.
Always charge the battery pack between temperatures 36ºF to 95ºF (2ºC to 35 ºC).
Ideal charging temperature is 65ºF to 84ºF (18ºC to 29ºC).
6.
Avoid short circuit of the battery pack connections (screws & nails).
7.
Charger is double insulated for additional electrical safety.
8.
Do not expose charger to rain or water.
9.
Charger is for indoor use only.
10. Do not incinerate or burn the battery pack, it may explode.
11. Do not charge a damaged battery pack.
12. Do not charge non-rechargeable batteries.
13. Replace any damaged power supply cords on your charger.
14. Always disconnect the charger power supply before making or breaking the con-
nections to the battery pack.
15. Battery pack and charger will be warm during charging, this is normal.
16. When not in use, remove a charged battery pack from the charger.
17. Always remove the battery pack from the charger immediately after re-charging is
completed.
WARNING: A small amount of electrolyte could leak from the battery pack under extremes
of temperature or after heavy use. Avoid contact with skin and eyes. Wash off immediately
from your skin and hands using clean water. For eye contact, rinse thoroughly with clean water
and seek medical treatment immediately.
Cordless Drill/Drivers
NA-WT150-M-050727.indd 4
WT150
2005-7-27 17:52:55
Tabla de contenido
