Waeco CF-80 Instrucciones De Uso página 31

_CF-80_110.book Seite 31 Montag, 8. Januar 2007 2:43 14
Caution - Danger of damaging the device!
Make sure that the polarity is correct.
➤ Before starting up the device for the first time, check whether
the operating voltage and the battery voltage correspond (see
type plate).
➤ Make sure that the cable at the positive battery terminal
(Fig. 7 2, page 5) is protected with a 15 A fuse (Fig. 7 3,
page 5).
➤ Plug the 12/24-V connection cable (Fig. 1 2, page 3) into the
DC socket on the cooler (Fig. 7 1, page 5).
➤ Connect the red cable (Fig. 7 rt, page 5) to the positive
terminal of the battery (Fig. 7 2, page 5).
➤ Connect the black cable (Fig. 7 sw, page 5) to the negative
terminal of the battery (Fig. 7 2, page 5).
Connecting to a 100–240 V AC mains (E.g. in the home or office)
Caution – Danger of electrocution!
Never handle plugs and switches with wet hands or if you are
standing on a wet surface.
Caution – Danger of electrocution!
If you are operating your cooler on board a boat from a mains
connection of 100–240 V AC, you must install a residual current
circuit breaker between the 100–240 V AC mains and the cooler.
Seek advice from a trained technician.
The cooler has a built-in multi-voltage mains adapter with a priority
circuit for connecting to a 100-240 V AC supply. The priority circuit
automatically switched to mains operation if the appliance is
connected to a 100–240 V AC supply, even if the 12/24 V cable is
still connected.
When switching between the AC mains and the battery supply,
the red LED may light up briefly.
➤ Plug the 100–240 V connection cable (Fig. 1 3, page 3) into
the AC voltage socket and connect it to the 100–240 V AC
voltage mains.
All manuals and user guides at all-guides.com
Operation
31