different from those intended could result in a
hazardous situation.
5. BATTERY TOOL USE AND CARE
a) Recharge only with the charger specified
by the manufacturer. A charger that is suitable
for one type of battery pack may create a risk of
fire when used with another battery pack.
b) Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
6. SERVICE
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
HEDGE TRIMMER SAFETY
WARNINGS
1. Keep all parts of the body away from the
cutter blade. Do not remove cut material
or hold material to be cut when blades are
moving. Make sure the switch is off when
clearing jammed material. A moment of
inattention while operating the hedge trimmer
may result in serious personal injury.
2. Carry the hedge trimmer by the handle
with the cutter blade stopped. When
transporting or storing the hedge trimmer
always fit the cutting device cover. Proper
handling of the hedge trimmer will reduce
possible personal injury from the cutter blades.
3. Hold the power tool by insulated gripping
surfaces only, because the cutter blade
may contact hidden wiring. Cutter blades
contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the
operator an electric shock.
4. Check the hedge for foreign objects, e.g. wire
fences.
5. Use both hands when operating the hedge
trimmer. Using one hand could cause loss of
control and result in serious personal injury.
Cordless shrub shear /
grass shear / weeder
GENERAL SAFETY
WARNINGS
WARNING: Read all safety warnings and
all instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The appliance is only to be used with the
power supply unit provided with the appliance
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
SAFE OPERATION PRACTICES
TRAINING
a) Read the instructions carefully. Be familiar with
the controls and the proper use of the machine.
b) Never allow children, persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge or people unfamiliar
with these instructions to use the machine. Local
regulations can restrict the age of the operator.
c) Keep in mind that the operator or user is
responsible for accidents or hazards occurring to
other people or their property.
PREPARATION
a) Never operate the machine while people,
especially children, or pets are nearby.
b) Before use, always visually inspect the machine
for damaged, missing or misplaced guards or
shields.
OPERATION
a) Wear eye protection, long trousers and stout
shoes at all times while operating the machine.
b) Avoid using the machine in bad weather
conditions especially when there is a risk of
lightning.
c) Use the machine only in daylight or good artificial
light.
d) Never operate the machine with damaged guards
or shields or without guards or shields in place.
e) Switch on the motor only when the hands and
feet are away from the cutting means.
f) Always disconnect the machine from the power
supply (e.g. remove the battery pack)
-
whenever leaving the machine unattended;
-
before clearing a blockage;
-
before checking, cleaning or working on the
machine;
-
after striking a foreign object;
-
whenever the machine starts vibrating
abnormally.
g) Take care against injury to feet and hands from
the cutting means.
h) Always ensure that the ventilation openings are
kept clear of debris.
9
EN