Taurus MITHOS TITANIUM Manual Del Usuario página 14

English
- Make sure that the appliance
is serviced only by specialist
personnel, and that only original
spare parts or accessories are
used to replace existing parts/
accessories
- Any misuse or failure to follow
the instructions for use ren-
ders the guarantee and the
manufacturer's liability null and
avoid.
Instructions for use
Before use:
- Make sure that all the product's
packaging has been removed
Insertion of a comb guide:
(Fig 1)
- To attach the comb guide, pick
up by its two tips and press aga-
inst the blades of the appliance
until is firmly fixes
- To extract the comb guide, just
pull out.
Use:
- Unroll the cable completely
before plugging it in.
- Remove the protective cover
(Fig.1)
- Connect the appliance to the
mains.
- Make sure that the blades are
correctly aligned.
- Turn the appliance on, by using
the on/off switch
How to cut the hair:
- Situate the person whose hair
you are going to cut so that the
top of their head is at your eye
level. Place a protective towel or
cloth around their neck.
- To obtain best results is better
to use the appliance on dry hair,
as it is much easier to control the
hair and the results
- Comb hair well before cutting.
Make sure that there are no
tangles or knots.
- Hold the appliance in calm
and relaxed manner in order to
ensure maximum control of the
cut and uniform result. Proceed
to use short cuts gradually going
around the head.
Leave the hair a little longer than
desired length as it can always
be altered later.
- While working adapt the comb/
comb guide to the desired result
- At regular intervals, stop cutting
in order to comb the hair and
check the results so far.
Step 1 – Nape:
- Attach the comb guide size 3
/ 6 mm
- Hold the appliance with the ra-
zor facing downwards and begin
to cut the hair from the base of
the neck.
- Make some upward move-
ments, raising the appliance gra-
dually and away from the head,