Before First Use; Adding Salt - Zanussi ZDF22002WA Manual De Instrucciones

The programme marker must be in
1. Press and hold
position.
2. Release when
3. Turn the knob counterclockwise until the programme marker is in
• The indicator
4. Press to change the setting.
• The indicator
5. Turn the knob to
CAUTION! If children have access to the appliance, it is advised to deactivate AirDry as
opening the door may pose a danger.

BEFORE FIRST USE

1. Make sure that the current level of the
water softener agrees with the hardness
of the water supply. If not, adjust the level
of the water softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any processing
residuals that can still be inside the appliance.

ADDING SALT

Before the first use, put one litre of water in the salt container.
position.
and simultaneously turn the knob counterclockwise until the programme marker is in
and Delay start to flash.
is on = AirDry is activated.
is off = AirDry is deactivated.
to confirm the setting.
position.
Do not use detergent and do not load the
baskets.
After starting a programme, it may take up to 5
minutes for the appliance to recharge the resin in
the water softener. It seems that the appliance is
not working. The washing phase starts only after
this procedure is completed. The procedure is
repeated periodically.
9