8- Maintenance; 9- Location Of Buttons For Gate Control; 10- Associating The Remote Control Buttons - Vimar Elvox EIM1 Manual Para El Conexionado Y El Uso

HIDDY
Maintenance: Periodically check the fixing screws, lubricate the hinges and the bush in the gate leaf rotation pivot, check the correct functioning of the safety
systems (photocells and sensitive edges), the robustness of the mechanical stops and the soundness of the systems for supporting the gate leaf (hinges or
bearings). Every 2 years it is recommended to replace the batteries in the remote control.
Location of the buttons for controlling the gate (selectors, keypads, buttons, etc.)
Control device
Association of the remote control buttons
Button Not used
Button 1
Button 2
If the automatic closing function is active (when the gate is stationary and open the flashing light stays
on) the gate closes after the set time. You can disable this function by pressing the button on the remote
control before the gate reaches the fully open position. If the sequential function is active it opens-stops-
closes.
If the gate meets an obstacle on closing, and automatic closing is active, the control unit makes
5 attempts at closing, after which it remains open. In this case it is necessary to remove the
obstacle from its path and control the gate with the transmitter and button so that it closes
completely at low speed.
18
Location
Controls total Controls partial
opening of the gate opening of the gate
Controls the second
channel output
Button 1
Button 2
EN