Taurus Geyser Diamond 2400 Manual De Usario página 14

English
Steam iron
Geyser Diamond 2400
Geyser Titanium 2600
Dear customer,
Many thanks for choosing to purchase a TAURUS brand
product.
Thanks to its technology, design and operation and the
fact that it exceeds the strictest quality standards, a fully
satisfactory use and long product life can be assured.
Description
A Spray button
B Steam blast button
C Steam regulator control
D Auto-cleaning button
E Temperature regulator
F Pilot light
G Auto-off indicator lamp *
H Fill-up opening
I Spray nozzle
J Soleplate
(*) Only available in model Geyser Titanium 2600
Safety advice and warnings
- Read these instructions ca-
refully before switching on the
appliance and keep them for
future reference. Failure to follow
and observe these instructions
may result in an accident.
Use or working environment:
- Keep children and bystanders
away when using this appliance.
-The appliance should be used
and kept over a flat and stable
surface.
Electric safety:
- Do not use the appliance if the
cable or plug is damaged.
- Ensure that the voltage indica-
Manual Geysers.indb 14
ted on the nameplate matches
the mains voltage before plugging
in the appliance.
- Connect the appliance to a base
with an earth socket withstanding
a minimum of 16 amperes.
- The appliance's plug must fit
into the mains socket properly.
Do not alter the plug. Do not use
plug adaptors.
- If any of the appliance casings
breaks, immediately disconnect
the appliance from the mains to
prevent the possibility of an elec-
tric shock.
- Do not use the appliance if it
has fallen on the floor, if there
are visible signs of damage or if
it has a leak.
Never use the electric wire to lift
up, carry or unplug the applian-
ce.
- Do not wrap the cable around
the appliance.
- Do not allow the connection ca-
ble to come into contact with the
appliance's hot surfaces.
- If using the appliance outdoors,
use a suitable cord extension.
- Connect the appliance to a base
with an earth socket withstanding
a minimum of 16 amperes.
- Do not touch the plug with wet
hands.
26/06/12 16:17