Black+Decker RT18 Manual De Instrucciones página 26

26 • ENGLISH
Selecting proper speeds
Different speeds are required depending upon the type
of operation being performed. The following chart outlines
those basic speeds:
OPERATION
Cutting metal
Sanding wood
Cutting hard metal
Engraving metal
De-burring
Drilling holes
Removing rust
Sharpening
Polishing
APPLICATION
Warning! To reduce the risk of injury, electric shock
and damage to the tool, before any work check the utility
lines electricity, gas or water supply line are hidden in the
work area.
Warning! Firmly grasp primary hold part of tool and
side handle before starting.
MAINTENANCE
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Warning! When servicing, use only identical replacement
parts. Use of any other part may create a hazard or cause
product damage.
DO NOT use solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloth to remove dirt, dust, oil, grease etc.
Warning! Do not at any time allow brake fluids,
gasoline, petroleum-based products, penetrating oils,
etc. to come in contact with plastic parts. They contain
chemicals that can damage, weaken or destroy plastic.
DO NOT abuse power tools. Abusive practices can
damage the tool as well as the workpiece.
Warning! Do not attempt to modify this rotary tool or
create accessories not recommended for use. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious injury. It
will also void the warranty.
SPEED
Maximum
Maximum
Maximum
Med-Max
Med-Max
Med-Max
Med
Med
Slow
Important! To assure product Safety and reliability,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service personnel,
always using identical replacement parts.
LUBRICATION
All of the bearings in this rotary tool are lubricated with
a sufficient amount of high- grade lubricant for the life
of the unit under normal conditions. Therefore, no further
lubrication is required.
ACCESSORIES
The performance of your tool depends on the accessory
used. BLACK+DECKER accessories are engineered to
high quality standards and designed to enhance the
performance of your tool. By using these accessories you
will get the very best from your tool.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your BLACK+DECKER
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide
for separate collection of electrical products from
the household, at municipal waste sites or by
the retailer when you purchase a new product.
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned
and authorized service locations. All BLACK+DECKER
Service Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service.
For more information about our authorized service centers
and if you need technical advice, repair, or genuine factory
replacement parts, contact the BLACK+DECKER location
nearest you, or visit us at www.BlackandDecker-la.com
SPECIFICATIONS
Power
AR
B2, B2C, B3, BR
No-load speed
Max chuck capacity
Weight
RT18
120W
180W
0-35000/min (rpm)
1/16" (1,6mm), 3/32" (2,4mm),
1/8" (3,2mm)
0,68kg (1,5lb)