Brinkmann TRAILMASTER 855-6305-S Manual Del Propietário página 7

Choose a good, cleared assembly area
and get a friend to help you put your grill
together. Lay card board down to protect grill
finish and assembly area. Turn the grill on its
side to begin assembly.
Step 1
Remove the lid from the cooking chamber
by removing hinge screws and sliding the
hinge pins on the lid out of the hinges on
the cooking chamber.
Step 2
Attach one long leg and one wheel leg
to the back side of the cooking chamber
using eight M6 X 12 mm bolts, M18
washers and M6 nuts. The wheel leg goes
on the side of the cooking chamber with
the firebox hole. Make sure that the holes
for the wire rack face up.
Step 3
Insert the hook of the wire rack through
the holes in the legs as shown.
Step 4
Attach remaining two legs by inserting the
hooks of the wire rack through the holes
in the legs, and then attaching to the front
side of the cooking chamber using eight
M6 X 12 mm bolts and eight M6 nuts.
Make sure that the wheel leg is on the side
of the cooking chamber with the firebox
hole.
6