Care, Maintenance, Transport And Storage; Care And Maintenance Of Cordless Tools - Hilti SID 14-­A Manual Del Usuario

▶ Press the torque selector button as many times as necessary until the desired torque setting is indicated
to the left of the button.
SID 14­A
SID 22­A
Model SID ... ?? → page 5
SIW 14­A
SIW 22­A
Model SIW ... ?? → page 6
5.8 Setting forward or reverse rotation
Note
An interlock prevents switching while the motor is running.
The control switch is locked when the forward/reverse switch is in the middle position (safety lock).
▶ Set the forward/reverse switch to the desired direction of rotation.
5.9 Screwdriving
WARNING
Risk of injury and damage. Screws/bolts or the workpiece may be damaged by excessively high
torque; this may also lead to serious injury.
▶ Ensure that the fastener and attachment will withstand the level of torque generated by the tool.
1. Set the forward/reverse switch to the middle position or remove the battery from the power tool.
2. Use the torque selector button to set the desired torque. → page 7
5.10 Switching on
▶ Press the control switch.
◁ Speed of rotation is regulated by the distance the control switch is pressed in.
5.11 Switching off
▶ Release the control switch.
5.12 Removing the battery
▶ Remove the battery.

6 Care, maintenance, transport and storage

6.1 Care and maintenance of cordless tools

WARNING
Danger of electric shock! Carrying out care and maintenance while the battery is fitted presents a
risk of serious physical injury and burning injury.
▶ Always remove the battery before carrying out all care and maintenance tasks.
Care and maintenance of the tool
• Carefully remove any dirt that may be adhering to parts.
• Clean the air vents carefully with a dry brush.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as
these may attack the plastic parts.
Care of the lithium­ion batteries
• Keep the battery free from oil and grease.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as
these may attack the plastic parts.
• Avoid ingress of moisture.
8
Printed: 27.07.2016 | Doc-Nr: PUB / 5293007 / 000 / 00
9
10