SPECIAL
FUNCTIONS
(CONT.)
CLEAN WASHER
O
A buildup of detergent residue can occur in the
wash tub over time and can lead to a mildewy
or musty smell. The CLEAN WASHER cycle is
Clec_r_ VTGsher specially designed to remove this buildup using
bleach or other cleaners designed specifically for
cleaning front load washers.
The CLEAN WASHER cycle should be run once a month, or more
often under heavy use conditions or if odor is present.
1,Turn ON the washer and press the CLEAN WASHER button.
Selecting any other cycle after CLEAN WASHER has been
selected will cause the CLEAN WASHER cycle to be cancelled.
2, Fill the bleach dispenser to the MAX line with liquid chlorine
bleach. Do not overfill the bleach dispenser. Overfilling will cause
the bleach to be dispensed immediately.
3oPress the START/PAUSE to start the cycle.
4,After the cycle has ended, open the door and allow the drum
interior to dry completely.
NOTE: Do NOT use this cycle with clothes, and do NOT add
detergent or fabric softener.
* For powdered tub cleaners, add the cleaner to the main wash
compartment of the dispenser drawer. Place tablet cleaners
directly into the tub. Always follow the cleaner manufacturers
instructions and recommendations.
MY CYCLE
O
llows you to activate your custom wash
(temperature, spin, soil level, etc.) with one-button
convenience.
_Ay Cycle
By pushing the MY CYCLE button, you activate
the settings used during the My Cycle mode. The
"My Cycle" Ilight indicates activation.
You can select all options as follows in the My Cycle mode.
1oSelect cycles using the Cycle Selector.
2oAfter cycle selection, set each option.
3oThen, you can store the cycle and options you select by
pressing the START/PAUSE button in the My Cycle mode. The
cycle and options you select are displayed the next time you
choose the My Cycle function.
NOTE:
• You can change the My Cycle settings by repeating the process
above. The last used setting is displayed the next time you
choose the My Cycle function.
,, If washing is completed in My Cycle mode, the washing machine
automatically enters My Cycle mode when you turn the power
on by pressing the POWER button.
2O
Kenmole-Washer-Ownels-Manual
EN.indd
20
3,23,2010
3:12:26PM