Troy-Bilt Horse Manual Del Operario página 25

WARNING!
Avoid pinching injuries. Never place
your fingers on the idler spring or between the belt
and a pulley while removing the belt.
3. Remove the belt guards by removing the self-tapping
screws that fasten them to the deck. See Fig. 7-6.
Belt Guard
Figure 7-6
4. Remove the deck belt from around the three spindle
pulleys and the two deck idler pulleys.
NOTE: The idler pulleys may have to be loosened, but not
removed, in order to remove the belt from around them.
5. Route the new belt as shown in Fig. 7-7.
6. Retighten idler pulleys, if loosened earlier.
7. Remount the belt guards removed earlier
Figure 7-7
s 7 — s 25
ectiOn ervice