Sienna Birdie SSC-0316 Manual De Instrucciones página 5

Filling your steamer with water:
1) Unscrew water tank cap (C) and fill steamer with water by using the refill cup (K). Replace
water tank cap (C) and tighten prior to use.
NOTE: The steamer does not require distilled water. Residents in areas with hard water should
use distilled water for better performance.
NOTE: Be sure to have desired attachments in place before plugging in the unit
2) Plug power cord into outlet. The power indicator light (G) will illuminate solid red. The
steamer will heat up and will be ready to use in less than 30 seconds.
NOTE: It is recommended that another high wattage appliance is not operated on the same
circuit to avoid a circuit overload.
3) This is a pump driven steamer. In order to produce continuous steam, repeatedly push the
steam pump button (D) as needed for desired steam flow.
4) If steamer is out of water, unplug the steamer from outlet and then simply refill the water
tank and continue steaming. There is no cooldown time required.
5) When finished steam cleaning, unplug power cord from outlet. Be sure to empty water tank
and carefully remove any accessories for drying.
WARNING: NEVER RUN THE STEAMER WITHOUT WATER.
USE AND ASSEMBLY
5