Tabla de contenido
Idiomas disponibles
Idiomas disponibles
14
15
16
17
18
19
20
USER MANUAL - OPTIMA T09W 6K/10K
NOT USED IN THIS MODEL
INVERTER VOLTAGE ADJUSTMENT:
** NO MODIFICATIONS RECOMMENDED – ONLY BY TECHNICIANS **
Inverter voltage can be adjusted
ADD: for increasing
SUB: for decreasing
Set values with keys: &
CHARGER VOLTAGE ADJUSTMENT (IN FLOATING STATE):
** NO MODIFICATIONS RECOMMENDED – ONLY BY TECHNICIANS **
Charger voltage can be adjusted
ADD: for increasing
SUB: for decreasing
Set values with keys: &
CHARGER VOLTAGE ADJUSTMENT (IN CONSTANT STATE):
** NO MODIFICATIONS RECOMMENDED – ONLY BY TECHNICIANS **
Charger voltage can be adjusted
ADD: for increasing
SUB: for decreasing
Set values with keys: &
MAXIMUM CHARGER CURRENT:
Max current in Amps can be set by this function.
Available Values: 1Amp, 2Amp, 4Amp & 8Amp.
Factory set: 2Amp.
** NO MODIFICATIONS RECOMMENDED – ONLY BY TECHNICIANS **
BATTERY PACK CONFIGURATION
From this function UPS knows information of batteries connected to UPS:
Battery capacity in AH
Total quantity of Battery groups connected to UPS (Internal & External)
This information is used by UPS to calculate RUNTIME value displayed on LCD when
Battery mode is active.
UPS 6K = 7Ah / UPS 10K= 9Ah
RUNTIME CALIBRATION:
Runtime value informed by LCD is a calculated value based on new batteries. Operator
can calibrate that value to approximate it to current real value. Value can be adjusted
by setting a multiplier from 0.5 to 2.0
If current real runtime is 90% of calculated runtime, operator should set multiplier as
0.9
VER.1801.25-WP+ (ENG)
22
Tabla de contenido
