Stopping The Engine; Technical Specifications; Techincal Specifications - Urrea GG835A Manual De Usuario Y Garantía

5. To operate electrical
equipment, turn the
circuit breaker ON.
Please note that when using
several appliances at the same
time, do not add the next one
unless the generator and other
items are running normally.
The total power of the loads
should not exceed the rated
power of the unit.

STOPPING THE ENGINE

1. Remove any load from
the generator.
2. Turn the engine switch
to the OFF position.
3. Turn the fuel valve to
the OFF position.
EMERGENCY TURN OFF
Turn the engine switch to the OFF position.
Warning: The surface temperature of the
generator unit are still high after shutdown,
and it should not be moved or touched before
cooling down to avoid the possibility of burns.
The unit should be stored in a clean and dry
place and should be protected from rain
and high temperature. Covering the unit is
recommended to avoid excessive exposure to
moisture and dust.
E N G L I S H •
If the generator is not used regularly remove
the fuel via the drainage bolt of the carburetor
and drain the fuel tank. Then tighten the oil
drainage bolt again. If a quality fuel stabilizer is
used then this procedure can be ignored.

TECHNICAL SPECIFICATIONS

GG835A
OUTPUT POWER
MAXIMUM OUTPUT POWER
ENGINE POWER
RATED NOMINAL CA
FREQUENCY
PHASES
DISPLACEMENT
APPROX. RUN TIME AT 50%
LOAD
FUEL TANK CAPICITY
OIL CAPACITY
WEIGHT
U s er 's M an u al
2 500 W
3 000 W
7,5 HP
120 V~
60 Hz
1 ~
212 cc
15,9 h
15 L
600 mL
42 kg (92,5 lb)
19