Mounting Of Door Unit - Marmitek DOORPHONE 150 Modo De Empleo

MOUNTING OF DOOR UNIT

Drilled holes
1. Select a location near your door entrance where the surface is
not too rough. We recommend that you do some polishing to get
a plane surface or otherwise the unit may not be able to mount
properly.
It should be noted that the mounting bracket should not be
installed on metal screening surfaces or in the vicinity of other
electronic devices that may reduce the operating range. Using
the supplied self-tap screws, fix the mounting bracket onto the
wall.
2. In case there is a 12V DC supply, connect to the terminals marked
at the back of the caller unit. In addition, there are also
8 -12V
AC or DC
terminals marked
an electric door latch which can be
remotely opened by the
handset. Where a DC supply
is available, the call button
will be automatically
illuminated once the
environment gets dark. This
feature and the electric door latch
opening feature will not operate
when using alkaline batteries so as to
long battery life.
10
INSERT PLUGS INTO HOLES
(FOR CONCRETE WALL ONLY)
and for connecting to
8
keep a
© MARMITEK