Bosch 1 687 010 193 Manual Original página 26

en en 26 | 1 687 010 193 / 1 687 016 193 | Product description
3.5.6 Intermediate flange 1 685 702 096, ... 101, ...
111, ... 113, ... 115, ... 117
Intermediate flange with collar nut for VDO-CP with
conical drive shaft.
Tightening torque for the collar nut: 80 – 90 Nm.
1
Fig. 8: Intermediate flange with collar nut
1 Intermediate flange
2 VDO-CP with conical drive shaft
3.5.7 Adapter cables
Adapter cables 1 684 460 270 and 1 684 460 284
for connection to the pressure control valve (PCV =
Pressure control Valve) and the volume control valve
(VCV = Volume control valve) of the VDO-CP.
Fig. 9: Adapter cable 1 684 460 270
Fig. 10: Adapter cable 1 684 460 284
|
1 689 989 337 2017-06-15
2
458916-16_Pal
458916-11_Pal
3.5.8 Hose fitting 1 683 386 133
Hose fitting (Fig. 11, item 1) for connection of the test
oil supply line or test oil return line to the VDO-CP
(e. g. Type Lynx) with plug-in system (Fig. 11, item 3).
The hose fitting is plugged into the supply connection
or test oil return connection on the VDO-CP. The
hose fitting is secured by means of holding clamp
1 685 200 116 (Fig. 11, item 2).
458916-17_Pal
Fig. 11: VDO-CP with plug-in system
1 Hose fitting 1 683 386 133
2 Holding clamp 1 685 200 116
3 VDO-CP with plug-in system
3.5.9 Quick-release coupling dummy plug
1 684 482 180
Quick-release coupling dummy plug for closing the
return connection on the pre-delivery pump of the VDO-
CP (e. g. on K9K Euro 5). To release, press the side
surfaces together and remove from the connection.
1
Fig. 12: VDO-CP with dual test oil return connections
1 Test oil return connection
2 Quick-release coupling dumbly plug
1
2
3
2
Robert Bosch GmbH