Registering The Cordless Camera To Your Computer - Panasonic KX-THA13 Manual De Instrucciones

Before Monitoring using your Computer
Registering the cordless
camera to your computer
Before registering the cordless camera to
your computer, confirm that:
– the base unit is connected to your
computer network (refer to the
"Installation Guide for MULTI TALK V
Software" for more information).
– the cordless camera's AC adaptor is
plugged in.
– the cordless camera is registered to the
base unit and its indicator is yellow-
green (refer to the operating instructions
of the base unit for more information).
1
Click [Start].
2 N For Windows XP users:
Point to [All Programs], point to
[Panasonic], point to [MULTI TALK
V], then click [MULTI TALK V
Camera Utility].
N For Windows 98SE, Windows Me,
and Windows 2000 users:
Point to [Programs], point to
[Panasonic], point to [MULTI TALK
V], then click [MULTI TALK V
Camera Utility].
LThe MULTI TALK V Camera Utility
window is displayed.
LWhen registering a cordless
camera for the first time, the
Register Device dialog box is
displayed. Confirm the instructions
in the dialog box, then click [OK] to
continue.
22
For assistance, please visit http://www.panasonic.com/phonehelp
3
Enter the cordless camera's MAC
address, then click [OK].
L The MAC address is printed on the
label found on the bottom of the
cordless camera.
L When the cordless camera is
successfully registered, "Ready" is
displayed in the status column of the
Device List.
L To view images from the cordless
camera, continue from step 3 of
"Accessing images from the cordless
camera", page 23.
4
Click [Close].
Note:
L If an error occurred, "Not ready" and
an error code may be displayed in the
status column of the Device List. Refer
to the error code section of the Help file
for information on error codes.
L If you notice that a different MULTI TALK
V device has been registered to this
application, erase it from the Device List
by clicking [Deregister].