Mounting The Device; Fig. 2: As6Interface Cable On The Ue3212 - SICK UE3212 Instrucciones De Servicio

Operating instructions
UE3212
WARNING
Fig. 2: AS-Interface cable on
the UE3212
8010726/TF84/2010-07-20
Subject to change without notice
Installation and mounting
4.2

Mounting the device

Protect the device against tampering and damage!
Take suitable measures to ensure that the device cannot be tampered with and that any
objects, vehicles or persons passing by the device cannot damage any connections.
Suitable measures may include for example: choosing a sufficiently protected mounting
location; installation of a protective hood to cover the device and connections.
During mounting ensure that the position of the AS6Interface cable is correct and that the
seals are correctly fitted, and carefully tighten all housing bolts to the correct torque, as
otherwise only a lower enclosure rating will be achieved.
Mount the safe bus node UE3212 on the selected base.
Clamp the base to a 356mm profile rail or fasten it to a support.
Fit the yellow AS6Interface cable in the base; for this purpose use the seals provided.
AS-Interface
cable yellow
Check that the gasket and the cable are correctly positioned.
Evenly tighten the 4 bolts on the housing diagonally to 0.8 Nm.
Seal unused socket using enclosed sealing cap.
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
GB
Chapter 4
91