Tabla de contenido
Idiomas disponibles
Idiomas disponibles
OPERATION
Cleaning the interior
Before using the appliance for the first time, wash
the interior and all internal accessories with luke-
warm water and some neutral soap so as to remove
the typical smell of a brand-new product, then dry
thoroughly.
Use of the freezer
Control panel
A B
C
D
A
ON/OFF light
B
Freezer button ON/OFF
C
Temperature setting button (warmest)
D
Temperature indicator
E
Temperature setting button (coldest)
F
Alarm reset light
G
Alarm reset button
H
Auto Freeze light
I
Auto Freeze button
A. Light ON/OFF
B. Button ON/OFF
ON:
Press the button (B). The pilot light (A)
switches on.
OFF: Keep press the button (B) until the pilot light (A)
and the temperature indicator switched off.
C - E. Temperature setting buttons
The temperature can be adjusted between -15°C
and -24°C.
By pressing the button (C or E), the current
temperature setting flashes on the indicator. It is
possible to modify the setting temperature only with
flashed indicator. To set a warmer temperature, press
button (C). To set a colder temperature, press button
(E). The indicator display the newly selected
temperature for a few seconds and then shows again
the inside compartment temperature.
The newly selected-temperature must be reached
after 24 hours.
20
F
G
H I
E
Do not use detergents or abrasive
powders, as these will damage the finish.
Attention!
During the stability period by the first starting the
temperature displayed can not correspond to the
setting temperature.
D. Temperature indicator
During normal functioning the indicator shows the
temperature inside the freezer.
Attention!
Difference between the temperature displayed and
temperature setting is normal. Especially when:
-
a new setting has recently been selected
-
the door has been left open for a long time
-
warm food has been placed in the compartment.
Tabla de contenido
