Call Waiting - ClearSounds Talk500 V508 Manual Del Usario

It is possible to switch from a handset conversation to a speakerphone
conversation by pressing the
the handset accordingly.
1. Dial on the keypad the telephone number. The telephone will voice
the digits dialed (with voice option YES) as well as display them
on the LCD. To correct a number press the DELETE button for each
incorrect digit.
2. Either a) pick up the handset, b) press the DIAL button or c) press
button.
To redial the last number called:
1. Lift the handset or press
2. press the REDIAL button.
Note: The last number dialed manually (up to 32 digits long) can be
redialed.
You can insert a 3.6 seconds pause into dialing or storing a number
into memory in order to access custom and telebanking services, long
distance, etc. press REDIAL button at the desired point in number. press
REDIAL button again if an additional 3.6 seconds is needed.
When you receive a call, the telephone rings, the Ringer LED flashes,
and the display shows the CALL# and the caller telephone number
(with Caller ID service activated), and says the name of the caller if
the number matches with a name recorded in the phone book, if not,
it will say the numbers of the calling party.
This feature allows you to decide to pick up the phone or not
depending on who is calling.
1. pick up the handset or press
2. At the end of the call, return the handset to the cradle or press
button again.
Many special telephone services, such as Call Waiting, require a
switch-hook signal. For example, if you have Call Waiting, you can
pre-Dialing A Call
Receiving A Call
If you want to talk to the caller:

Call Waiting

button and picking up or hanging up
Redial
button.
pause
button to answer the call.
9 – ENGLISH