Panel Interpretation; Pausing/Stopping A Test - alfatest Multijet Pro Manual Del Usuario

MULTIJET PRO

4.1 - PANEL INTERPRETATION

The Multijet PRO is a multitask equipment (it can operate simultaneous functions, being controlled through the same
panel, display and keys).
Selection of a function is only possible when the "F" icon is ON in the panel (the keyboard will be available for
operations of function selection and activation).
When a function is selected, the panel automatically changes its operations.
After selecting a function, the "F" icon will be disabled and the icons of the respective function will come on.
WHENEVER THE MULTIJET PRO IS NOT PERFORMING ANY OF THE FUNCTIONS, THE "F" ICON WILL
REMAIN ON IN THE PAINEL, INDICATING THAT IT IS AVAILABLE TO PERFORM AN OPERATION.
To execute tasks simultaneously, see the directions in the chapter "Executing Simultaneous Operations (Multitask)".
4.2 - PAUSING / STOPPING A TEST
If there is need to pause the test during the procedure, press the Stop/Pause . The letter "P" will be displayed
in the panel, indicating that the test has been paused.
To continue the paused test, press the Star/Cont. .The display will show the message "nP"
To abort the test, press the Stop/Start key twice. The test will be aborted and the panel will be positioned in "F"
function, providing the selection of a new test.
WHEN A TEST IS PAUSED, THE PUMP WILL REMAIN ON AND THE SYSTEM PRESSURIZED. IF THE
TEST IS NOT RESTARTED IN 1MIN., IT WILL BE DISABLED AUTOMATICALLY.
22