Tabla de contenido
Idiomas disponibles
Idiomas disponibles
7. TEMP / HUMIDITY / AIR PRESSURE INFO
7.1 °C/°F Temperature Display
The temperature is displayed either in °C/°F. The temperature unit can be changed by
●
pressing the ▲ button.
●
If the temperature reading is below the minimum range then LL.L will be displayed. If it
is above the maximum reading then HH.H is displayed.
7.2 Outdoor Temperature Alert Settings
Press and hold down the ALERT button for 2 seconds until the icon for Temperature
●
Alert starts to flash.
●
The icon of Upper limit of the alarm will flash. Use the ▲ and ▼ buttons to set the
required maximum temperature. Press the ALERT button to confirm the settings.
●
The icon of Lower limit of the alarm will flash. Use the ▲ and ▼ buttons to set the
required maximum temperature. Press the ALERT button to confirm the settings and to
end the settings procedure.
7.3 Activating and Deactivating Temp/Frost Alerts
Briefly press the ALERT button to activate or deactivate the Temperate Alert and Frost
●
Alert.
●
If the frost alert is activated snowflake icon will appear in the Outdoor Temperature area.
The alarm will sound at -1°C to +3°C or at +30°F to +37°F.
If the temperature alert is activated the Temp Alert symbol appears in the Outdoor
●
Temperature area. The alarm will sound at the set values and either Hi or Lo will show.
Both the temperature and frost alerts can be active at the same time and both icons will
●
show on the weather station.
7.4 Maximum/Minimum Temp and Humidity
To toggle the indoor/outdoor max/min temperature and humidity press the MEM button:
●
Once to show maximum temperature and humidity.
●
Twice to show the minimum temperature and humidity.
Three times to return to the current temperature and humidity.
●
To reset the max/min temperature and humidity hold the MEM button for about 2 seconds.
9
Capítulos
Tabla de contenido
