Tabla de contenido
Idiomas disponibles
Idiomas disponibles
6. ALARM SETTING
6.1 Setting the Daily Alarm
Note: After 20 seconds without pressing any button, the clock switches automatically from
Set Mode to Normal Time Mode.
Pressing the ALARM button once will change the display from showing the alarm time to
showing the calendar, pressing it again will switch the display back.
Proceed as follows to set the alarms:
Press and hold down the ALARM button for 2 seconds until the alarm time hour display
●
starts to flash.
●
Press the ▲ and ▼ keys to to set the correct hour.
Press ALARM to confirm the settings.
●
●
The minute display will start to flash. Press the ▲ and ▼ keys to to set the correct
minute.
Press ALARM to confirm the settings end the alarm setting procedure.
●
6.2 Activating and Deactivating the Alarm
Move the alarm switch to ON to activate the alarm. The
●
when the alarm is active.
Move the alarm switch to OFF to deactivate the alarm. The
●
shown on the display.
6.3 Alarm Information
Press any button except the SNOOZE/LIGHT button to deactivate the alarm when it
●
sounds.
If not manually stopped the alarm will sound for 2 minutes before automatically
●
stopping.
Once the alarm has been stopped it does not need resetting as it will automatically
●
sound 24 hours later at the set time.
Rising Alarm (length: 2 minutes) changes the volume four times whilst the alarm signal is
●
heard.
6.4 Automatic Snooze Function
Proceed as follows to activate the automatic snooze function:
While the alarm is sounding, press the SNOOZE/LIGHT button to activate the snooze
●
function.
This operation moves the alarm back by 5 minutes and the alarm will restart at this time.
●
●
The snooze function can be interrupted by pressing any button.
8
icon will show on the display
icon will no longer be
Capítulos
Tabla de contenido
