Temp / Humidity / Air Pressure Info; C/°F Temperature Display; Outdoor Temperature Alert Setting; Activating And Deactivating Temp/Frost Alerts - THINK GIZMOS TG672 Manual Del Usuario

6. TEMP / HUMIDITY / AIR PRESSURE INFO

6.1 °C/°F Temperature Display
The temperature is displayed either in °C/°F. The temperature unit can be changed by
●
pressing the + button.
● If the temperature reading is below the minimum range then LL.L will be displayed. If it
is above the maximum reading then HH.H is displayed.
6.2 Outdoor Temperature Alert Settings
Press and hold down the ALERT button for 2 seconds until the icon for Temperature
●
Alert starts to flash.
The icon of Upper limit of the alarm will flash. Use the + and - buttons to set the required
●
maximum temperature. Press the ALERT button to confirm the settings.
The icon of Lower limit of the alarm will flash. Use the + and - buttons to set the required
●
minimum temperature. Press the ALERT button to confirm the settings and to end the
settings procedure.
The above settings are only for the currently displayed channel. If you want to set
temperature alerts for the other channels, press the CH button to switch to the channel you
need to set, and then follow the settings again.

6.3 Activating and Deactivating Temp/Frost Alerts

Briefly press the ALERT button to activate or deactivate the Outdoor Temperate Alert. A
●
icon will show in the temperature alert box when activated.
● If the outdoor temperature alert is activated the alarm will sound at the set values and
either Hi or Lo will show.
● The frost alert is automatically enabled and the frost alert symbol will show at -1°C to
+2.9°C or +30.2°F to +37.2°F.

6.4 Maximum/Minimum Temp and Humidity

To toggle the indoor/outdoor max/min temperature and humidity press the MEM button:
● Once to show maximum temperature and humidity.
● Twice to show the minimum temperature and humidity.
● Three times to return to the current temperature and humidity.
To reset the max/min temperature and humidity hold the MEM button for about 2 seconds.

6.5 Mould Risk

The weather station will show the current mould risk at the location of the weather station
and the sensors.
● Low Mould Risk (LO) will show when Humidity is <60%.
● Medium Mould Risk (ME) will show when Humidity is ≥ 60% and ≤70%.
● High Mould Risk (HI) will show when Humidity is > 70%.
9