Alarm Settings; Setting The Alarm; Activating And Deactivating The Alarms; Snooze Function - THINK GIZMOS TG505 Manual De Usuario

4. ALARM SETTING

4.1 Setting the Alarm

Note: While setting the alarm, if no button is pressed for 10 seconds the display will
automatically switch to the normal time display.
In normal time mode press the "MODE" button twice to enter the alarm mode.
●
● Press and hold the "MODE" button for two seconds, the hour digits start to flash.
● Press the "UP" or "DOWN" button to set the hour.
● Press the "MODE" button to confirm your setting.
● The minute digits start to flash, press the "UP" or "DOWN" button to set the minutes.
● Press the "MODE" button to confirm your setting.
● Press the" MODE" button to return to the normal time display or the display will
automatically return to normal time display after 10 seconds.
4.2 Activating and Deactivating the Alarm
Press the "UP" button to activate or deactivate the alarm, if the alarm is activated the alarm
symbol (bell icon) will be displayed on the screen.

4.3 Snooze Function

● When the alarm sounds press the "SNOOZE/LIGHT" button to enter snooze mode.
● The alarm will sound again after every 8 minutes.
● During the snooze interval the bell symbol will blink.
The snooze function can be stopped by pressing any button on the back, apart from the
●
"SNZ" button.

4.4 Stopping the Alarm

● When the alarm is sounding press any button on the back, apart from the "SNZ" button,
to stop the alarm.
The alarm will automatically stop sounding after 2 minutes.
●
6