Gateway To Mfm Connection Test - WEG Cassia Gateway X1000 Guía De Configuración

3 GATEWAY TO MFM CONNECTION TEST

In some situations, it may be necessary to perform a connection test from the Gateway to the MFM
cloud without having to use the user's network or a dongle with access to the 3G/4G mobile network.
In this case, you can follow the steps below:
1. Have 2 devices at hand: a smartphone and a laptop (or another smartphone).
2. Enable the smartphone Wi-Fi router to provide internet to the Gateway.
3. Using the laptop (or smartphone), connect to the Gateway via Wi-Fi.
4. To establish a connection to the Wi-Fi network provided by the smartphone, make the settings according to
Chapter 2 INTERNET CONNECTION REQUIREMENTS on page 6
At the end of the procedure described in this topic or in the combination of
page 4 and Chapter 2 INTERNET CONNECTION REQUIREMENTS on page 6
must be online on the MFM platform and sending the measurement data from the WEG Motor Scan sensors that
are close to the Gateway and have the "via Gateway" communication mode.
Gateway to MFM Connection Test
of this manual
Chapter 1 GENERAL INFORMATION on
of this guide, the Gateway
Configuration and Commissioning Guide | 7